Table of Contents
Advertisement
Press the M button for the same effect in the opposite
direction.
Using the above jump and search operations, you can
rapidly start playback on the DSR-DU1 from any
desired point.
Notes
• For the i.LINK interface to switch from output to input
takes several seconds. During this interval, no
playback video is output.
• After playback ends, it takes several seconds for the
i.LINK interface to switch from output to input, and
during this interval, no recording is possible.
• In DUPLICATE mode, and during interval recording,
the playback function does not operate.
• If the total number of clips has exceeded 750,
playback of consecutive clips may involve a
discontinuity of image or sound or both at joints of
clips (i.e. at recording start points).
Setting Cue Points
On the DSR-DU1, information identifying the recording
start and pause points is automatically recorded to the
hard disk.
By pressing the CUE button during recording/playback,
you can record any point on the hard disk in the form of
cue point information.
With a nonlinear editing system that supports this
information, you can use material recorded on the DSR-
DU1 for efficient editing.
Deleting Recorded Material (Clips)
To delete the immediately previous recorded
clip
In the menu page 3, select DELETE LAST (see
page 22).
By repeating this operation, you can delete clips from
the hard disk in sequence from the latest.
To delete all clips
In the menu page 5, select DELETE ALL (see page 23).
If the number of clips is large, deleting them may take
several minutes.
21
Operation
Advertisement
Table of Contents
