Table of Contents
Advertisement
DSR-DU1 Video Disk Unit (Removed From Supplied Case)
a UNLOCK lever
To remove the main unit from the supplied case,
first press this lever down.
b Release button
To remove the main unit from the supplied case,
press the UNLOCK lever down, then hold in this
button while removing the unit.
c Backup battery box
Open the lid, and insert the supplied lithium battery
(CR2032). This acts as a backup power supply for
the main unit.
For details of fitting and replacement, see
"Inserting and Replacing the Lithium Battery"
(page 15).
10
Names and Functions of Parts
To remove the unit from the
case, press down 1, then hold
in 2 while withdrawing the unit
in the direction of the arrow.
2 Release button
1 UNLOCK lever
4 Main battery box
3 Backup battery box
DSR-DU1 main unit
Note
This unit keeps data required to protect the hard
disk data using the backup power supply.
Therefore, when the backup battery capacity is low,
recording is not possible.
d Main battery box
Fit the optional NP-F960/F750 battery pack. This
acts as the main power supply for the DSR-DU1.
To remove the battery pack, hold down the PUSH
button on the side of the box.
For details of fitting, see "Fitting the battery "
(page 17).
Supplied case
Advertisement
Table of Contents
