Table of Contents
Advertisement
Inserting and Replacing
the Lithium Battery
This camcorder uses a lithium battery to retain stored
data. When using the camcorder for the first time, be
sure to insert the supplied lithium battery (CR2032). The
camcorder will not operate correctly without this lithium
battery.
Lifetime of the lithium battery
When the lithium battery's voltage falls, the lithium
backup battery warning
Li
the display window. If this warning appears, replace the
lithium battery (CR2032) within three or four days.
The lithium battery has an average service life of about
two years.
Inserting or replacing the lithium battery
Notes
• Carefully read the instructions for inserting and
replacing the lithium battery. Lithium batteries can
explode if misused.
• Use only CR2032 Lithium Batteries. Other types of
lithium batteries may come loose when this camcorder
is moved. If you have difficulty finding CR2032
Lithium Batteries, contact your Sony dealer.
1
Turn the POWER switch on.
2
Press the catch at the top of the battery cover and
open the cover.
DSR-DU1
(removed from supplied case)
flashes once per second in
Press and pull up.
3
Take out the lithium battery.
Press in and pull up
4
Reverse step 3 to insert a replacement lithium
battery. Make sure that the + symbol on the battery
is facing you.
5
Close the battery cover.
Inserting and Replacing the Lithium Battery
15
Advertisement
Table of Contents
