Table of Contents
Advertisement
Connecting to a Camcorder Through the CA-DU1 Camera Adaptor
As an example, the following illustrates connection to a
DSR-370/370P/570WS/570WSP Digital Camcorder.
1
Remove the DSR-DU1 main unit from the supplied
case.
2
Attach the CA-DU1 Camera Adaptor to the
camcorder.
3
With the i.LINK cable supplied with the camera
adaptor, connect the 6-pin connector to the DV
OUT connector of the camcorder, and the 4-pin
connector to the DV IN/OUT connector of the
camera adaptor.
DSR570WS/570WSP, DSR-370/370P,
or DSR-250/250P Digital Camcorder
4
Insert the DSR-DU1 main unit in the camera
adaptor.
5
Provide the power supply to the camcorder and
DSR-DU1 by any of the following methods.
• Install a battery pack (BP-L90A/L60A/L40A or
BP-M50/M100).
• Connect an AC adaptor to the camera adaptor DC
IN connector.
Note
Whe the DSR-DU1 is connected, do not use the DC
IN connector of the camcorder. This connector does
not supply power to the DSR-DU1.
DSR-DU1 Video Disk Unit
CA-DU1 Camera
Adaptor
6-pin
i.LINK cable (supplied with CA-DU1)
BP-L90A/L60A/L40A or
BP-M50/M100 Battery Pack
4-pin
Example System Configurations
13
Advertisement
Table of Contents
