Getting Started; Programming Features - Assa Abloy EMTEK LISCIO User Manual

Device App
App is free and available at App Store (Apple devices) or Play Store (Android devices).
A. From Apple devices (iPhone 4S, 5, 5S & 5C; iPad 3rd generation and later running iOS 6.1 and later)
1. Go to App Store, select Search, enter "Emtek", select "Emtek Liscio Bluetooth", select download icon, when
ready select Open. If upon opening app you receive a screen that advises you that your device is "Unsup-
ported" you will not be able to run app on this device.
B. From Android devices (OS 4.3 and later)
1. Go to Play Store, select Search icon, enter "Emtek", select "Emtek Liscio Bluetooth" app, select Install, select
Accept, when ready select Open. If app does not appear then your device is running OS prior to 4.3.
C. Once App is opened you will be on the Welcome screen
1. selecting Start you will move through the setup wizard, lock will need to be nearby for this
2. select Videos, Quick Reference, About or Show Phone Info as needed
3. If you call Emtek for customer service please have the information listed in the Show Phone Info available.

Programming Features

Once App is setup and you have logged into app you will be on the Home screen – from here you can:
A. Select Users – you can add, edit and delete users
1. To add user – select + New, enter Name and enter user code (factory set at 4 digits)
2. To edit user – select user to edit, user information will be shown, select Edit, edit as needed, select Update
3. To delete user – select user to edit, user information will be shown, select Edit, select X Delete
4. You must communicate changes to lock before they are recognized at the lock – see Transfer below (B)
B. Select Transfer – you can send data/setting changes to the lock, view lock activity or get data/settings from
the lock
1. Sending data to Lock – to communicate any user adds, edits or deletes along and any settings changes
2. Viewing lock activity – lock activity on app is from last update, you will need to select Get new lock activity
to view the latest activity
3. Getting data from Lock – to communicate latest user and setting data from the lock to the app
C. Select Setting – you can customize some of the lock and app features
1. From the settings screen you can edit the noted settings, scrolling down is Advanced Settings
D. Select Logoff when you are done or when you want to program a different lock.
E. Battery Status – when BT communications are successful, an "Operation Complete" screen gives you a battery
status.
1. "Good" means battery has the power to operate lock and BT communications.
2. "Low" means battery still has power to operate lock and BT communications but should be replaced. Lock
LED shows 4 amber flashes and 4 beeps.
3. "Blackout" means the battery can no longer operate lock and battery must be replaced. Lock LED shows 6
red flashes and 6 beeps
4. Replacement battery should be a high quality 9 volt alkaline battery. Battery is located behind the interior
trim plate.

Getting Started

3