Compare Button; Renaming Sounds - Korg SV-1 Editor Manual

When a knob replicates a knob on the control panel of the SV-1, a red dot
appears over it.
Replicates a control
NOTE: The name of a parameter may be different than the name of the real knob
on the SV-1's control panel.
C
OMPARE BUTTON
You can use the COMPARE button to listen to the original sound, to compare it
with the edited sound.
• When no parameter has been edited, the button is greyed out
and therefore not available.
• When one or more parameters have been edited, the button
becomes solid and available. SV-1 can detect the status of a
parameter. If you move the knobs to the original value of the
parameters, the button is greyed out again and not available.
• If you click the button to momentarily recall the original set-
tings, the button "lightens up" in red. In this situation, you
can listen to the original sound, and can do no editing. Click
the COMPARE button again to return to the edited preset.
R
ENAMING SOUNDS
The name of the selected sound always appear in the top right corner of the edi-
tor.
Getting to know the SV-1 Editor | Compare button – 15
panel's knob
Knob not available on
the control panel