Table of Contents
Advertisement
8566_1408 8700_ed5.qxp
05/12/05
12:02
Side 7
User Manual for Kirk 4020 and 4040
6
3. Charging
During normal operation, it takes approximately 3 1/2 hours to charge the handset from fully discharged to its full
capacity. Place the handset in the charger. When the handset is turned on, the display shows the charging status
in line 3. For correct charging be sure the room temperature is between 0°C and 25°C. Do not place the handset in
direct sunlight. The battery has a built-in heat sensor which will stop charging if the battery temperature is too high.
It is necessary to recharge the battery when the display shows "BATTERY LOW", or if it can not be turned on. The
LED flashes at a low frequency while charging and lights constantly when the charging is finished. The display
goes back to normal mode when fully charged.
KIRK telecom
. . . .
When the handset is placed in the charger it will not vibrate, and B-answer is inactive. If the battery is fully dis-
charged, up to 10 min. may pass before charging begins and the handset can be turned on. When the charger
begins the charging, status is shown in the 3rd line of the display and the LED flashes slowly.
VoIPon
www.voipon.co.uk
sales@voipon.co.uk
Tel: +44 (0)1245 808195
Fax: +44 (0)1245 808299
Advertisement
Table of Contents
Need help?
Do you have a question about the Kirk 4020 and is the answer not in the manual?
Questions and answers