Polycom KIRK 4040 Features Manual

POLYCOM KIRK 4040 DECT HANDSET FEATURE GUIDE
 Press the
button for 1 second
 When the handset is turned on the
shown in the lower left corner of the display, if the
handset is subscribed to a system
 Press the
button for 4 seconds
Note: When the handset has been outside
the coverage area, it can take up to 30
seconds before the handset is back on the
system after re-entering the coverage
area.
 For making or receiving calls the handset has to be
subscribed to a system (shown in display)
 Press the
button, the icon in the display
will flash until the connection is established
 Dial the number onto the keypad
 Dial the number onto the keypad (long press on
the button will make a pause, if necessary).
Press the button, the icon will flash until
the connection is established
 Press the > (BOOK) to enter the telephone book
 Search for the number either by using the < or >
buttons or by pressing the first letter in the name
symbol is
by using the digits 1 - 9
 Press the
the connection is established
 To answer a call, press the
To place a caller on hold,
 Press the R button
 To retrieve the call, press R
 While on a call press the R button
 Dial the extension of phone number
 Wait for answers
 Press
to hang-up
 While on a call press the R button
 Dial the extension of phone number
 Wait for ring tone
 Press
to hang-up
button, the icon will flash until
button
 Press R button then dial *68 and the extension of
phone which call is to be parked, then hang up