Symbology Settings Table; Symbologies - CipherLab CP30 Reference Manual

SYMBOLOGY SETTINGS TABLE

1D SYMBOLOGIES
2D Engine
Codabar
CLSI Editing
NOTIS Editing
Select Length
(min/max)
Intercharacter Gap
Size
Code 128
GS1-128
(UCC/EAN-128)
GS1-128
(UCC/EAN-128)
ISBT 128
ISBT Concatenation
Description
When applied, the CLSI editing strips the start/stop
characters and inserts a space after the first, fifth, and
tenth characters of a 14-character Codabar barcode.
The 14-character barcode length does not include
start/stop characters.
Decide whether to include the start/stop characters in the
data being transmitted.
NOTIS Editing is to strip the start/stop characters,
which equals
Characters".
One or two fixed lengths
Range (1~55)
The Code 39 and
intercharacter gap that is typically quite small. Due to
various barcode printing technologies, this gap can grow
larger than the maximum size allowed, preventing the
scan engine from decoding a barcode. If this problem
occurs, set it to "Large Intercharacter Gaps" to tolerate
these out-of-specification barcodes.
Normal intercharacter gaps
Large intercharacter gaps
Read GS1-128 barcodes with leading FNC1 character.
Read GS1-128 barcodes with leading FNC1 character.
Read ISBT 128 barcodes.
Decide whether to decode and concatenate pairs of ISBT
barcodes.
Disable
Enable – When this option is selected, there must be
two ISBT barcodes for the scanner to decode and
perform concatenation.
Auto-discriminate – When this option is selected, the
scanner decodes and concatenates pairs of ISBT
barcodes immediately. If only a single ISBT barcode is
present, the scanner must decode 10 times before
transmitting its data to confirm that there is no
additional ISBT barcode.
Appendix III
to "Disable Transmit
Codabar

symbologies

2D Imager (SE4500)
Default
Enable
No
No
Start/Stop
4~55
have an Normal
Enable
Enable
Enable
Enable
Disable
163