Miscellaneous - CipherLab CP30 Reference Manual

CP30 Mobile Computer
Addons redundancy
EAN-8 extend
UCC coupon extended
code
UPC
UPC-A/UPC-E/UPC-E1
Enable Addons
Addons redundancy
Transmit Check Digit
Convert to UPC-A
UCC coupon extended
code
Transmit Preamble

MISCELLANEOUS

Laser Engine
Miscellaneous Options
154
Reference Manual
When "Auto-discriminate" is applied, decide the number of
times (2~30) of
barcode that makes a valid reading.
Read UPC-A barcodes starting with digit "5", EAN-13
barcodes starting with digits "99", and UPC-A/GS1-128
Coupon Codes.
UPC-A, EAN-13, and GS1-128 must be enabled first!
Use "Addon
auto-discrimination of the GS1-128 (right half) of a
coupon code.
For the default value, the UPC-A and UPC-E are enabled.
Decide whether to decode EAN-8, EAN-13, UPC-E0,
UPC-E1, UPC-A with addons.
Ignore Addons
Decode Only With Addons
Auto-discriminate
When "Auto-discriminate" is applied, decide the number of
times (2~30) of
barcode that makes a valid reading.
Decide whether to include the UPC-A/UPC-E/UPC-E1 check
digit in the data being transmitted.
The UPC-E0/UPC-E1 barcode will be expanded into UPC-A,
and the next processing will follow the settings configured
for UPC-A.
Read UPC-A barcodes starting with digit "5", EAN-13
barcodes starting with digits "99", and UPC-A/GS1-128
Coupon Codes.
UPC-A, EAN-13, and GS1-128 must be enabled first!
Use "Addon
auto-discrimination of the GS1-128 (right half) of a
coupon code.
Decide whether to
preamble System Character (and Country Code) in the
data being transmitted.
Description
supplementary decoding
Redundancy"
supplementary decoding
Redundancy"
include the UPC-A/UPC-E/UPC-E1
10 times
the same
No
No
to control
---
Ignore...
10 times
the same
Yes
No
No
to control
System
Character
Default
---