Laser (Se955); Reader Settings Table - CipherLab CP30 Reference Manual

LASER (SE955)

The tables below list reader settings as well as symbology settings for the Laser (SE955)
scan engine.

READER SETTINGS TABLE

Laser Engine
Decode Time-out
Redundancy Level
Level 1
Level 2
Level 3
Level 4
Scan Angle
Scan Mode
Continuous Mode
Description
Set the maximum time for decoding to continue during a
scan attempt.
1~9 (second)
Following barcodes must be successfully read twice before being decoded:
Barcode Types
Codabar
MSI
Industrial 25 (Discrete 25)
Interleaved 25
All barcodes must be successfully read twice before being decoded.
All barcodes except for the following barcodes must be successfully read
twice before being decoded. Following barcodes must be read three times:
Barcode Types "Excluded"
MSI
Industrial 25 (Discrete 25)
Interleaved 25
All barcodes must be successfully read three times before being
decoded.
Select the scan angle for Long Range Laser scan engine.
"narrow" for 35°
"wide" for 47°
Non-stop scanning
To decode the same barcode repeatedly, move away the scan beam
and target it at the barcode for each scanning.
Appendix II
Code Length
All
4 characters or less
8 characters or less
8 characters or less
Code Length
4 characters or less
8 characters or less
8 characters or less
Default
3 sec.
Level 1
Wide
Laser mode
149