CipherLab CP30 Reference Manual page 175

CP30 Mobile Computer
ISBT Concatenation
Redundancy
Industrial 25 (Discrete 25)
Select Length
(min/max)
Interleaved 25
Convert to EAN-13
Check digit verification Decide whether to verify the check digit. If desired, select
Transmit Check Digit
Select Length
(min/max)
Matrix 25
Redundancy
Check digit verification Decide whether to verify the check digit. If the check digit
Transmit Check Digit
Select Length
(min/max)
Chinese 25
Code 39
Convert to Code 32
Code 32 Prefix
Check digit verification Decide whether to verify the check digit. If the check digit
Transmit Check Digit
Code 39 Full ASCII
164
Reference Manual
When "Auto-discriminate"
concatenation redundancy (2~20 times).
One or two fixed lengths
Range (1~55)
Convert a 14-character barcode into EAN-13 if the
following requirements are met:
The barcode must have a leading 0 and a valid EAN-13
check digit.
"Check digit verification" must be disabled.
one of the algorithms below. If the check digit is incorrect,
the barcode will not be accepted.
Disable
USS check digit
OPCC check digit
Decide whether to include the check digit in the data being
transmitted.
One or two fixed lengths
Range (1~55)
Decide whether to enable decode redundancy.
is incorrect, the barcode will not be accepted.
Decide whether to include the check digit in the data being
transmitted.
One or two fixed lengths
Range (1~55)
Convert to Italian Pharmacode.
Prefix character "A" to Code 32 barcodes.
is incorrect, the barcode will not be accepted.
Decide whether to include the check digit in the data being
transmitted.
"Check digit verification" must be enabled.
Code 39 Full ASCII includes all the alphanumeric and
special characters.
is applied, decide the 10 times
Enable
4~55
Enable
No
Disable
No
4~55
Enable
No
No
No
4~55
Enable
Enable
No
No
No
No
No