Korg STAGE VINTAGE SV-1 User Manual page 38

24 – Using the SV-1 | Selecting and editing the effects
Use the three EQUALIZER knobs to adjust the low, mid and high frequen-
2.
cies. After having changed a knob position, you can return to the default set-
tings by pressing the corresponding knob.
WARNING: Extreme EQ settings may produce a very loud signal.
The SV-1 includes a stompbox simulator, that recreates the sound of a pedal
3.
effect inserted before the amplifier's input. Use the TYPE knob of the PRE FX
section to select a different stompbox effect (compressor, booster, U-Vibe,
vibrato, tremolo or wah).
If the wah effect is selected, use the AUTO/PEDAL button to change between
Auto-Wah (LED off, filter changing automatically depending on the sound
and the playing dynamics) and Pedal-Wah (LED on, filter controlled by an
expression pedal connected to PEDAL input 2; if no pedal is connected, the
filter will be fixed).
NOTE: Before using an expression pedal to control the wah, it is advisable to
calibrate it. See "Calibrating the pedals" on page 31.
You can change the speed of the modulation of the U-Vibe or tremolo effects
by using the SPEED knob, and the intensity of the modulation by using the
INTENSITY knob. To return to the default settings, press the SPEED or
INTENSITY knob.
NOTE: The booster stompbox may produce a very loud signal.
PRE-FX type
Comp
Boost
U-Vibe
Vibrato
Tremolo
Vox Wah
NOTE: The Manual Wah control only works when the AUTO/PEDAL button is in Pedal mode.
The SV-1 includes an amp simulator, to choose among a series of vintage and
4.
modern instrument amplifiers. Use the TYPE knob of the AMP MODEL sec-
tion to select a different amplifier. You can change the preamp's volume
(therefore, its overdrive saturation) by using the DRIVE knob. To return to
the default setting, press the DRIVE knob.
SPEED knob
Sens
Drive
Speed
Type
Speed
Manual Wah
INTENSITY knob
Level
Level
Depth
Mix
Depth
Type (V-847, V-848)