Using The Sv-1; Selecting The Sounds - Korg STAGE VINTAGE SV-1 User Manual

Using the SV-1

S
ELECTING THE SOUNDS
SV-1 has 36 sound (6 base sounds × 6 variations), and every one of these sounds
can be "custom tweaked" using just the knobs on the front panel. You can then
save the changes into the eight FAVORITES locations. (More detailed editing can
be performed using the SV-1 Editor software).
Use the TYPE knob of the SOUND section to select a base type of sound. Use the
VARIATION knob of the SOUND section to select one of the variation of the
base sound. Notice that the LED next to the knobs lights up to show the selected
sound and variation.
As an example, here's how to select the sound PIANO/STRINGS.
Make sure that neither the LOCAL OFF, nor the FUNCTION LEDs are
1.
turned on.
If they are, press the corresponding buttons to turn them off.
Use the TYPE knob in the SOUND section to select the PIANO base sound.
2.
The corresponding LED around the TYPE knob will turn on.
Use the VARIATION knob in the SOUND section to select variation 5, corre-
3.
sponding to the PIANO/STRINGS sound.
The corresponding LED around the VARIATION knob will turn on.
The preset sounds cover an amazing range of sounds; vintage electric pianos,
classic grand pianos, aggressive modern metallic-sounding pianos for active
comping, rich-sounding organs, and much more. Here is a brief description of
each of them.
Using the SV-1 | Selecting the sounds – 19