Korg STAGE VINTAGE SV-1 User Manual page 27

MODULATION FX section
B
Here you can select a modulation effect. This selects one of six modulation effect
models. After selecting an effect with the TYPE knob, you can use the SPEED
and INTENSITY knobs to adjust the effect parameters. To reset a parameter to
the default value, press the corresponding knob. Effects are placed after the amp
and cabinet model.
The SLOW/FAST button switches the speed of the rotary effect.
NOTE: The parameters will be initialized when you select a different preset.
REVERB/DELAY section
C
Here you can select a reverb, delay or echo effect. This selects one of four reverb,
one echo, or one delay effect models. After selecting an effect with the TYPE
knob, you can use the DEPTH knob to adjust the effect's intensity. To reset it to
the default value, press the DEPTH knob. Effects are placed after the amp and
cabinet model, and after the modulation effect.
In case the stereo delay effect is selected, you can 'tap' its time on the TAP button.
NOTE: The parameters will be initialized when you select a different preset.
POWER switch
D
Use this switch to turn the power on/off.
B
Controls and connections | Front panel – 13
C D