Kyocera Printserver Installation Manual page 49

Plug and Print for IP
Plug and Print for IPX
Print Server Installation Manual
Installing in NetWare 5 Networks with NDPS Gateways
The IP printer agent to be created is named as follows:
Print server name_<IP address>@IP
SB0001FF_192.168.0.123@IP
If you are printing via IP, Novell can be turned off on the print
server. In this case the network load is reduced, but the
KyoNetCon is no longer available.
When creating an IPX printer agent using the Plug and Print
feature, the following occurs:
• A Container Kyo_NDPS containing a print server, a printer
and a print queue, is created in the tree of the NetWare
Administrator.
• The print server is configured using its name and context and
is linked with the objects to be printed.
• The IPX printer agent receives the name of the print server,
e.g. SB0001FF.
• Print jobs sent to the printer agent are transferred to the print
queue.
Plug and Print deletes all print queues of existing printers / print
servers and links the newly created print queue to all detected
printers. Network segments can be filtered via the module kycon
and thus excluded from this selection. Therefore, Plug and Print is
especially suitable for newly created networks or network
segments.
Please read the documentation for the KYOCERA NDPS
Gateway. You will find it as a *.pdf in the same directory that the
Gateway was installed in.
No IPX printer agents will be created for printers which have
already been set up in the print server or remote printer (NDS
print) modes.
2-21