Kyocera Printserver Installation Manual page 19

Procedure
Trouble Shooting
1.2.2.4. KyoNetCon
Print Server Installation Manual
Proceed as follows:
1. Edit the ARP table:
Syntax: arp -s <IP address>
Example: arp -s 192.168.0.123
2. Assign a new IP address to the print server:
Syntax: ping <IP address>
Example: ping 192.168.0.123
The 'Addition failed' error occurs when you use the 'arp'
command. This error informs you that the ARP table is empty and
that the new entry cannot be added. This problem occurs with
certain operating systems such as all Microsoft Windows versions
with the exception of NT 4.0. The solution to the problem is to
ping a station in the network before using the 'arp' command for
the first time or use the KyoNetCon to enter the IP address.
Using the KyoNetCon the IP address can be easily assigned to the
print server.
Saving the IP address using the KyoNetCon in networks with
routers is only possible if the router can handle multicast queries
and the print servers are searched via multicast queries. For more
information read the "Searching for Print Servers" section on page
4-5 in the User Manual.
If the print server is connected to the printer and the printer is
turned on, the print server appears as 'New Print Server' with the
IP address 000.000.000.000 in the print server list. Via the shortcut
menu the desired IP address can be entered.
Basic TCP/IP Terminology
<hardware address>
00-c0-eb-00-01-ff
1-11