Kyocera Printserver Installation Manual page 27

What Happens
When Printing?
WINS Without
DHCP
Print Server Installation Manual
During the installation of the print server, its host name is
displayed on the monitor of the computer intended for printing. In
order for you to be able to assign the host name to the IP address,
the computer asks the DNS server for the IP address of the print
server. If the DNS server cannot answer this request, it forwards
the request to the WINS server. Once the computer receives the
answer, it sends the print data to the IP address of the print server.
You can also enter the IP address instead of the host name during
the print server installation. If you have done this, you may then
send print data directly to the IP address.
If you wish to configure your print server on a DHCP server,
please read the documentation for your operating system if
necessary.
You can also set up the print server in a network only with WINS
and without DHCP. In this case, the print server registers with the
WINS server directly. In this process, you must configure the IP
address of the WINS server manually in the print server. You must
first disable the 'DHCP' and 'WINS via DHCP' parameters. You
can configure these parameters using the print server homepage,
the KyoNetCon, SNMP or FTP parameter transfer.
DHCP
1-19