Kyocera Printserver Installation Manual page 157

4.6.4.2. Creating the Printer Device
Procedure
4.6.4.3. Entering the Printer into the Spooler System
Print Server Installation Manual
3. Change the default values of the HOST, PORTS, and FTP
variables in the new shell script.
4. Change the access rights of this file:
Syntax:
chmod 2555 /etc/printserver/interfaces/<script name>
chown bin /etc/printserver/interfaces/<script name>
chgrp printq /etc/printserver/interfaces/<script name>
Example:
chmod 2555 /etc/printserver/interfaces/my_script
chown bin /etc/printserver/interfaces/my_script
chgrp printq /etc/printserver/interfaces/my_script
The print spooler requires a printer device. Due to the fact that the
print server does not need a physical device, a link is made to a
zero device.
Proceed as follows:
1. Enter the following command:
Syntax: ln -sf /dev/null /dev/<zero device name>
Example: ln -sf /dev/null /dev/my_device
The AIX print spooler is administered by means of the 'mkque'
command.
Printing via Shell Scripts
4-37