Kyocera Printserver Installation Manual page 20

Basic TCP/IP Terminology
Procedure
1.2.2.5. KYOCERA Printer Operating Panel
1-12
For more information concerning the KyoNetCon read the
"InterCon-NetToolKyoNetConPRINTSERVER Administration
ToolNetLine - Administration ToolPRINTSERVER -
Administration Tool" chapter on page 4-1 in the User Manual.
Proceed as follows:
1. Start the KyoNetCon.
2. Right-click on the 'New Print Server' in the print server list.
3. Select 'Assign IP Address...' from the shortcut menu.
4. Enter the IP address in the 'IP address' box.
5. Click 'Finish.'
The IP address is saved in the print server.
With all KYOCERA printers, you can enter the IP address directly
into the printer operating panel and save it in the print server.
In addition to the IP address, you can also change other parameters
using the printer operating panel.
Please read the "Configuring Parameters Using the KYOCERA
Printer Operating Panel" section on page B-14 of the User Manual.
Operating panel settings will not be saved in the print server if a
password has been assigned.
Print Server Installation Manual