Kyocera Printserver Installation Manual page 144

Printing via TCP/IP Ports
4-24
3. Add a new printer:
Syntax: xpadd -dev <printer name>
-da <host name> <TCP/IP port>
-su <supervisor> -co <connection>
-aa -pc <printer control language>
Example: xpadd -dev my_printer
-da SB0001FF 9100
-su admin -co LAN
-aa -pc HP-LASERJET
4. Activate the printer:
Syntax: xpchange -dev <printer name> -st <status>
-si <job acceptance> -so <job processing>
Example: xpchange -dev my_printer -st ACTIVE
-si ON -so ON
5. Test the printer:
Syntax: xpadd -job -dr <file name> -de <printer name>
Example: xpadd -job -dr /etc/hosts -de my_printer
Print Server Installation Manual