Kyocera Printserver Installation Manual page 158

Printing via Shell Scripts
Procedure
4.6.4.4. Enabling the Printer
Procedure
4-38
Proceed as follows:
1. Enter the following command:
Syntax: mkque -q<printer name> -a"up = "'TRUE' &&
mkquedev \
-q<printer name> -d<printer name> \
-a"file = /dev/<zero device name>" \
-a"backend = /etc/printserver/interfaces/<script>"
Example: mkque -qmy_printer -a"up = "'TRUE' &&
mkquedev \
-qmy_printer -dmy_printer \
-a"file = /dev/my_device" \
-a"backend = /etc/printserver/interfaces/my_script"
You may have to enter the full path ('/usr/lib/mkque,' for example)
when using the 'mkque' command.
Once the printer has been entered into the spooler system, you
must enable the printer so that print jobs can be accepted.
Proceed as follows:
1. Enter the following command:
Syntax: enq -U -P<printer name>
Example: enq -U -Pmy_printer
Print Server Installation Manual