Advertisement
BACKLIGHT
BLC
HLC
Off
Picture Adjust
Mirror
General adjustments Brightness : Contrast : Sharpness : Hue and Gain
D-WDR
Luminance
Contrast
Motion Detection
SET UP MENU TWO
PRIVACY
Area
Top
Bottom
Left
Right
Colour
Transparency
Mosaic
DAY/NIGHT
Burst
Delay Cnt
6
Multiple ways to control high levels of back lighting disturbing
the viewing area such as sunlight or external lighting
Standard back light control
A clever version of BLC that will automatically blank out any areas
of very high light source within the viewing area whilst allowing
normal images from surrounding areas
BLC off
Adjustments to the image output
Enables a mirror image of the monitored area
Enables the camera to provide a balanced image in areas where
high and low light levels exist simultaneously
Control of areas of high Luminance without effecting darker areas
Adjustment of areas that have subtle changes in tone or contrast.
High setting brings out clarity of these areas
Allows creation of motion detection zones however we suggest
use of the DVRS own motion detection technology in preference
Allows sections of the area viewed to be blanked off for
modesty, legal or privacy reasons
Up to four separate privacy areas can be created. Select which area
you wish to work with (1 , 2 , 3 or 4)
Creates the shape and position of the privacy area
Selects the colour used to mask all privacy areas
Selects the transparency of the privacy areas to still allow
monitoring of general movement
Creates a mosaic effect on privacy areas
Controls how the camera handles colour in day and night
conditions
Can improve lost colour due to long cable runs
Delays the switch between night and day mode (IR-ON / IR-OFF)
Advertisement
