Advertisement
ON SCREEN DISPLAY (OSD) SET UP
The on-screen menu can be operated by the OSD control
button shown. Move the button up, down, left or right to
access options and press the button to activate the options.
Please find below a list of the most useful functions found
within the Effio E processor.
Not all functions shown on the menus are covered as they are very
rarely required in CCTV installations.
Throughout the menu listing below the main sections are shown in bold text, the sub menus
for each section are then listed below. Press the OSD control button to enter sub menus.
IMPORTANT – When any changes are made with the OSD menu you must select SAVE ALL
before exiting the menu.
SET UP MENU ONE
LENS
SHUTTER / AGC
Manual
Automatic
WHITE BALANCE
ATW
Manual
User 1/2
For this camera leave as MANUAL
Control of how the camera reacts to a light source
There are two choices of sub-menu
Allows specific set up of the shutter and automatic gain control that
will be fixed even when light levels change. Useful in very low light
conditions
Allows specific set up of shutter and automatic gain control that will
also react to changing light levels to provide the best image
High luminance control is used when viewing very bright scenes.
Low luminance control is used in low light levels
Multiple ways to control white light balance
Automatic tracking of the white balance (sub menu)
Flourescent light , sunlight and incandescet light all have different
colour temperatures. ATW automatically ensures correct
reproduction of white images as different light sources are used
Allows a manual fixed setting of the white balance
Allows specific control of the way the camera reacts to strong
saturation of blue or red within the viewing area. Useful in areas
that are continually illuminated with single colour light sources such
as nightclubs or retail displays
5
Advertisement
