E-Mail Rx (Pop) Settings; E-Mail Rx (Pop) Parameters - Konica Minolta BIZHUB 600 User Manual

Specifying Settings From the Control Panel
3.22

E-Mail RX (POP) Settings

You can specify the settings to perform the authentication of the e-mail
sender with POP Before SMTP.

E-Mail RX (POP) Parameters

The E-Mail RX (POP) parameters are as follows:
E-Mail RX (POP) screen 1/2
Item
E-Mail RX Setting
POP Server Address
Login Name
Password
E-Mail RX (POP) screen 2/2
Item
SSL Setting
Port Number (SSL)
POP Detail screen
Item
APOP Authentication
Port No.
Connection Timeout
bizhub 750/600
Description
Specify whether to enable authentication reception.
Specify the address of the POP server to be used for au-
thentication reception.
For details on specifying the settings, refer to "POP Server
Address" on page 3-98.
Sets the login name used to connect to the POP server.
Use the keyboard that appears in the touch panel to type in
the login name (up to 63 characters).
Sets the password used to connect to the POP server. Use
the keyboard that appears in the touch panel to type in the
password (up to 15 characters).
Description
Specify whether to use SSL in the authentication reception
time. When SSL is used, the content that is sent is encrypt-
ed.
Specify the port number for using SSL. To change the val-
ue, press the [C] (clear) key, and then use the keypad to
type in the value (between 1 and 65535).
Description
Sets whether to turn on authentication.
Set the port number used to communicate with the POP
server. To change the value, press the [C] (clear) key, and
then use the keypad to type in the value (between 1 and
65535).
If the operation delays while receiving the authentication
from the POP server, e-mail reception is automatically
aborted after time elapses. Set the time from the point
when the reception stops to the point when the mail
reception is to be aborted. To change the value, press the
[C] (clear) key, and then use the keypad to type in the value
(between 30 and 300 seconds).
3
3-95