Konica Minolta BIZHUB 600 User Manual page 68

Scanning Documents
3
Touch [Scan Settings] to check the specified scan settings. The spec-
ified settings can also be changed.
– For details on the scan settings, refer to "Specifying the Scan Set-
tings" on page 2-43.
4
After checking the settings, touch [OK].
5
Load the document into the ADF or position it on the original glass of
the machine.
6
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.
bizhub 750/600
2
2-33