Konica Minolta BIZHUB 600 User Manual page 73

2
4
Touch [Scan Settings], and then specify the scan settings.
– For details on the scan settings, refer to "Specifying the Scan Set-
tings" on page 2-43.
5
After specifying the settings, touch [OK].
6
Load the document into the ADF or position it on the original glass of
the machine.
7
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.
2-38
Scanning Documents
bizhub 750/600