Center Erase (Application) - Konica Minolta BIZHUB 600 User Manual

2
4
Specify the width to be erased.
– To erase all sides with the same width, touch [Frame] and enter the
value.
– To specify the width separately for the top, left, right, and bottom
sides, touch the corresponding button and enter the value. To
specify that no area is erased, touch [None].
– For North American users, touch [⇔] to switch between the integer
and the fraction.
5
Touch [OK], and then touch [OK] in the next two screens that appear.

Center Erase (Application)

When scanning a page spread, the shadow of the binding at the center can
be erased.
The width of the erased area can be set between 0.1 and 30.0 mm.
1
Touch [Scan Settings] in the Scan mode screen.
2
Touch [Application].
2-66
Scanning Documents
bizhub 750/600