Sending Data In An E-Mail Message (Scan To E-Mail); Scan To E-Mail; Using Programs - Konica Minolta BIZHUB 600 User Manual

2
2.3

Sending Data in an E-Mail Message (Scan to E-Mail)

Scan to E-Mail

The Scan to E-mail operation is used to send images scanned on this ma-
chine to an e-mail address as an attachment.
The methods described below are available for specifying the destination.
The methods can also be combined, for example, by selecting a group des-
tination, then adding other destinations through direct input.
Note
For the procedure for sending e-mail, refer to "Sending the Scanned Data
in an E-Mail Message" on page 1-3.

Using Programs

"Program" refers to a set of destination addresses and scan settings that are
registered together. This feature is convenient for frequently scanning docu-
ments and sending data under the same conditions. The following procedure
describes how to send data by selecting a program that has been registered
in advance.
For details on registering programs, refer to "Registering Program Destina-
tions" on page 3-24.
1
Press the [Scan] key on the control panel.
The Scan mode screen appears.
2-6
Scan
Scanning Documents
bizhub 750/600