Troubleshooting Tips; When This Type Of Copy Is Produced - Konica Minolta Printer Copier User Manual

Troubleshooting Tips

9 Troubleshooting Tips
9.1

When This Type of Copy is Produced

Symptom
The image is too light.
The image is too dark.
The copy is blurry.
The copy has lines.
The copy has dark specks or spots.
Konica 7115/7118
Possible Cause
The image density is set at "Lighter."
The paper is damp.
The image density is set at "Darker."
The original is not placed firmly
against the Platen Glass.
The paper is damp.
The original is not placed firmly
against the Platen Glass.
The Platen Glass surface is dirty.
The Original Pad is dirty.
The original is highly transparent.
The original is 2-sided.
Action
Adjust the image density to the darker
side. (p.5-16)
Change the paper. (p.8-4)
Adjust the image density to the lighter
side. (p.5-16)
Place the original in position so that it
is placed firmly against the Platen
Glass. (p.4-7)
Change the paper. (p.8-4)
Place the original in position so that it
is placed firmly against the Platen
Glass. (p.4-7)
Wipe the Platen Glass clean with a
soft dry cloth. (p.10-5)
Wipe the Original Pad clean with a soft
cloth dampened with neutral
detergent. (p.10-5)
Place a blank sheet of paper over the
original. (p.4-8)
The information on the backside of a
2-sided, thin original may be slightly
reproduced on the copy. Adjust the
image density to the lighter side. (p.5-
16)
9
9-1