Storing A Job - Konica Minolta Printer Copier User Manual

7
7.7

Storing a Job

You can store frequently used job settings in memory to call up later for quick job setup. Up to
two different settings can be stored: job 1 (Jb1) and job 2 (Jb2).
Note
No jobs can be stored while the copier is warming up or is in the Interrupt mode.
Job Storing Procedure
1
Set up the job you want to store in memory.
2
Press the [JOB STORE] key.
3
Check that "Jb1" appears on the Display.
If you want your job stored as "Jb2," change it on the
Display.
? Do you know how to change the contents of the
Display?
➜
Each time the [JOB STORE] key is pressed, the
Display alternates between "Jb1" and "Jb2."
? Do you know what happens if another job has already been stored in the job number
selected?
➜ Storing a new job will erase the old one.
4
Press the [ENTER] key.
7-30
Using the Utility Mode
Konica 7115/7118