Thick Stock; Envelopes - Konica Minolta Magicolor 4650DN User Manual

Thick Stock

Paper thicker than 90 g/m
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
Capacity
Orientation Face down
Driver
Media Type
Weight
Duplexing
DO NOT use thick stock that is
Mixed with any other media in Tray 1 (as this will cause printer misfeed-
ing)

Envelopes

Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
Capacity
Orientation Face down
Driver
Media Type
Weight
Duplexing
Use envelopes that are
Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
Approved for laser printing
Media Types
2
(24 lb bond) is referred to as thick stock. Test all
Tray 1
(Manual Feed
Tray)
Tray 2/3
Thick 1 (91-150 g/m
Thick 2 (151-210 g/m
91–210 g/m² (25–55.9 lb bond)
Not supported
Tray 1
(Manual Feed
Tray)
Tray 2/3
Envelope
91-163 g/m² (25-43 lb bond)
Not supported
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
Up to 20 thick stock sheets, depending on
their thickness.
Not supported
2
)
2
)
Up to 10 envelopes, depending on their
thickness
Not supported
103