Dual In-Line Memory Module (Dimm); Installing A Dimm - Konica Minolta Magicolor 4650DN User Manual

Dual In-Line Memory Module (DIMM)

You may need additional memory (DIMM) for complex graphics and
for duplex (double-sided) printing.
Dual in-line memory module (or DIMM) is compact circuit board with sur-
face-mount memory chips.
There is 256 MB of onboard memory and one available memory expansion
slot. the memory can be expanded to a maximum of 768 MB (256 MB + 512
MB).

Installing a DIMM

Note
It's very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 219. In addition,
always handle circuit boards by the edges only.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
2
Using a screwdriver, remove the
screw. Then, slide the rear cover
to the right and remove it.
220 Dual In-Line Memory Module (DIMM)