Konica Minolta Magicolor 4650DN User Manual page 177

Do not leave the printer's covers open for any length of time, especially in
well-lit places; light may damage the toner cartridges.
Do not open the printer during printing.
Do not tap media stacks on the printer.
Do not lubricate or disassemble the printer.
Do not tilt the printer.
Do not touch the electrical contacts, gears, or laser devices. Doing so
may damage the printer and cause the print quality to deteriorate.
Keep media in the output tray at a minimum level. If the media is stocked
too high, your printer may experience media misfeeds and excessive
media curl.
Make sure two people are avail-
able to lift the printer when mov-
ing it.
Keep the printer level to avoid
toner spillage.
When lifting the printer, fold up
Tray 1, and then lift the printer as
shown in the illustration at the
right.
If the optional lower feeder unit
is installed, move it and the
printer separately. Do not grasp
the grip of Tray 3, or the right
side cover; otherwise, the lower
feeder unit may be damaged.
If you get toner on your skin, wash it off with cool water and a mild soap.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
Make sure any parts removed during cleaning are replaced before you
plug in the printer.
Maintaining the Printer
37 kg
81.5 lbs 81.5 lbs
163