Thick Stock - Konica Minolta MAGICOLOR 2300W User Manual

Dusty
Wet (or damp)
Keep media between 35% to 85% relative humidity. Toner does
not adhere well to moist or wet paper .
Layered
Adhesive
Folded, creased, curled, embossed, warped, or wrinkled
Perforated, three-hole punched, or torn
Too slick, too coarse, too textured
Different in texture (roughness) on the front and back
Too thin or too thick
Stuck together with static electricity
Composed of foil or gilt; too luminous
Heat sensitive or cannot withstand the fusing temperature (356°F/180°C)
Irregularly shaped (not rectangular or not cut at right angles)
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
Acidic
Any other media that is not approved

Thick Stock

Paper thicker than 24 lb (90 g/m
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
Capacity
Orientation Face up
Type
Driver
Media Type
Weight
Duplexing
Notes
Media Types
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
2
) bond is referred to as thick stock. Test all
Tray 1 Up to 50 thick stock sheets, depending on their
thickness. Thick stock is supported only in letter,
A4, or smaller media sizes.
Check http://printer.konicaminolta.net/support (click on
"Answer Base") for currently approved media.
Thick stock
25–43 lb bond (91–163 g/m²)
Not supported
43 lb (163 g/m²) bond is also referred to as 90 lb index stock.
13