Konica Minolta Magicolor 5430 DL User Manual page 89

Do not leave the printer's covers open for any length of time, especially in
well-lit places; light may damage the toner cartridges.
Do not open the printer during printing.
Do not tap media stacks on the printer.
Do not lubricate or disassemble the printer.
Do not tilt the printer.
Do not touch the electrical contacts, gears, or laser devices. Doing so may
damage the printer and cause the print quality to deteriorate.
Keep media in the output tray at a minimum level. If the media is stocked
too high, your printer may experience media misfeeds and excessive
media curl.
Make sure two people are avail-
able to lift the printer when mov-
ing it.
Keep the printer level to avoid
toner spillage.
When lifting the printer, grasp
the areas shown in the figure to
the right.
Front
Even if an optional lower feeder
unit is installed, be sure to lift the
printer as shown below. Do not
grasp the grip of Tray 2, 3 or the
right side cover; otherwise, the
lower feeder unit may be dam-
aged.
81
Maintaining the Printer