4
Pull out Tray 1, and then remove
all media from the tray.
5
Fan the media you removed and
then align it well.
If transparencies are loaded, do not fan them; otherwise, static
electricity may be produced, resulting in another media misfeed.
6
Load the media face up in Tray 1.
Make sure that the media is flat.
Do not load paper above the
Do not load more than 10 envelopes or 20 sheets of labels, post-
cards, thick stock, or transparencies at one time.
Slide the media guides against the edges of the media.
7
Close Tray 1.
Clearing Media Misfeeds
M
mark.
95