Service Messages - Konica Minolta Magicolor 5430 DL User Manual

Service Messages

These messages indicate a more serious fault that can only be corrected by a
customer service engineer. If one of these messages appears, turn the printer
off, then turn it on again. If the problem persists, contact your local vendor or
authorized service provider.
This service
message...
ERROR
AIDC SENSOR
ERROR
COMMUNICATION
ERROR
CONTROLLER
ERROR
DIMM
ERROR
ENGINE INTERFACE
ERROR
RAM
ERROR
ROM
FATAL ERROR
CODE:XX
124
means...
AIDC sensor error.
A communication error
occurred in the USB or
Ethernet interface.
Controller internal error. Contact Technical Sup-
SDRAM DIMM error.
A communication error
occured with the engine
controller.
RAM writing/reading
error.
ROM error.
An error has been
detected with the item
indicated "XX" in the ser-
vice message.
Status, Error, and Service Messages
do this...
Contact Technical Sup-
port with the error infor-
mation.
Check that the interface
cable is properly con-
nected to the printer.
If the error continues to
appear even though the
cables are correctly con-
nected, contact Techni-
cal Support.
port with the error infor-
mation.
Contact Technical Sup-
port with the error infor-
mation.
Contact Technical Sup-
port with the error infor-
mation.
Contact Technical Sup-
port with the error infor-
mation.
Contact Technical Sup-
port with the error infor-
mation.
Reboot the printer. This
often clears the service
message, and printer
operation can resume.
If the problem persists,
contact Technical Sup-
port.