Konica Minolta Magicolor 5430 DL User Manual page 114

Symptom
Media is
misfeeding.
106
Cause
The media is not cor-
rectly positioned in
the tray.
The number of sheets
in the tray exceeds
the maximum
allowed.
The media guides are
not correctly adjusted
to the media size.
Warped or wrinkled
media is loaded in the
tray.
The media is moist
from humidity.
Custom-sized media,
envelopes, labels,
postcards, thick
stock, or transparen-
cies are loaded in
Tray 2 and 3.
The recommended
transparency or label
sheet is facing the
wrong way in Tray 1.
Envelopes are facing
the wrong way in Tray
1.
Solving Problems with Media Misfeeds
Solution
Remove the misfed media and reposi-
tion the media properly in the tray.
Remove the excess media and reload
the correct number of sheets in the
tray.
Adjust the media guides in the tray to
match the size of the media.
Remove the media, smooth it out, and
reload it. If it still misfeeds, do not use
that media.
Remove the moist media and replace it
with new, dry media.
Special media must be loaded in Tray
1 only.
Load the transparencies or label
sheets according to the manufacturer's
instructions.
Load the envelopes in Tray 1 so the
flaps are facing down.
If the flaps are on the long edge, set
the envelopes in Tray 1 so that the
flaps are facing into the printer.