Scan To Ftp - Konica Minolta C200 Scanning Manual

SCAN TO FTP

This setup for FTP scanning is the same as the Emperon controller. Please refer
to Page 22 for machine configuration, and
PageScope Cabinet or IIS, please refer to the following pages of the Konica
Minolta FTP & SMB Setup Guide for Windows.
PageScope Cabinet
IIS – XP
IIS – Vista
IIS – Server 2008
However, you do need to enable FTP by opening up Web Tools from the web
interface of the machine.
1) Click on Configure then Launch Configuration.
2) Click on Network\Services\Scan and put a tick in the FTP box.
3) Reboot the Fiery by clicking the Reboot button in the bottom left hand corner of
the screen.
for information on configuring either
- Page 4
- Page 5
- Pages 6
-
Page 12
14 Created by Hotline Support
Konica Minolta Hotline Support (UK)