Transferring Your Images (Macintosh) - Panasonic MultiCam PV-DV202-K Operating Instructions Manual

Transferring Your Images (Macintosh)

You can transfer images from your Palmcorder Memory Card to your Macintosh.
System Requirements
(for Built-in SD Drive/ArcSoft Software (PV-DV402-K only)
• Mac OS 9.0~9.1
• Mac OS 8.6~9.1 (for ArcSoft Software)
• iMac, iBook or Power Macintosh G3 with
USB port or Power Mac G4
• RAM: 64 MB or more
• CD-ROM drive (for installation)
Even if system requirements are met, there is no guarantee that the included software
will work on all personal computers.
Connection
1
Turn on your PC.
2
Set the Palmcorder POWER to M-CARD.
3
Connect the Palmcorder to your Macintosh using the USB Cable (supplied).
Note
• For extended use, it is recommended that you use the AC Adaptor as a power source.
92
DV202_402-K.p 92-93.p65
• USB Port
• Mouse or other pointing device
• 210 MB minimum available hard disk
space (for ArcSoft Software)
• High colour (16 bit) or more (for ArcSoft
Software)
2
USB Terminal
3
92
USB Terminal
USB Cable
(supplied)
2003/06/12, 10:15