Battery Care - Panasonic MultiCam PV-DV202-K Operating Instructions Manual

Battery Care

Caution:
• Charge only with specified charger.
• Charge the Battery within an ambient
temperature range of 10 °C (50 °F) and
30 °C (86 °F).
• The Battery may be warm after charging or just
after use. This is normal.
• Do not use an insufficiently charged or worn out
Battery.
• If charging is done in extreme low or high
temperatures, Battery charge time increases.
Safety precautions:
• Do not place the Battery near, or dispose of in fire.
• Do not directly connect (short circuit) the positive
(+) and negative (–) terminals.
• Never attempt to disassemble or reassemble the
Battery.
ATTENTION:
A lithium ion/polymer battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY for information
on how to recycle this battery.
Use AC Adaptor
3
2
POWER
Lamp
DC Cable
(Supplied)
DV202_402-K.p 15-17.p65
Supplying Power
To avoid damage to the Battery:
• Do not drop or jar the Battery.
• Use the Battery with specified models only.
• If the Battery is used in extremely high
temperatures, a safety device will automatically
prevent operation.
To ensure longer battery life:
• While not in use, remove Battery from the
Palmcorder and AC Adaptor and store in a
cool, dark, dry place. If you leave the Battery in
the Palmcorder or on the AC Adaptor, the Battery
will no longer be rechargeable.
• Keep the Battery terminals clean.
1
Slide the Battery downward while
1
sliding BATT RELEASE to remove the
Battery Pack. (p. 14)
2
Insert the DC Cable into the DC IN
Terminal.
BATT RELEASE
3
Connect the other end of the DC
Cable to the AC Adaptor as shown.
4
Plug in the AC Adaptor.
DC IN Terminal
• The POWER Lamp on the AC
Adaptor lights up.
1
Note
• When not in use, unplug the AC Adaptor
from the AC outlet. (AC Adaptor consumes
1 W of electric power when plugged into
an AC outlet even when not in use.)
2
DC Output Connector
15
3
2003/06/12, 10:14
15