Insert Memory Card - Panasonic MultiCam PV-DV202-K Operating Instructions Manual

Insert Memory Card*

*Memory Card: MultiMediaCard or SD Memory Card (p. 95)
• Be sure to insert the Memory Card before using the Card PhotoShot. (p. 49)
Below is a list of memory cards which can be used in this Palmcorder.
Memory Card
SD Memory Card (RP-SD008BMK0) (supplied)
MultiMediaCard (SanDisk brand)
MultiMediaCard (optional) (p. 94)
SD Memory Card write protection switch
A write protection switch is located on the SD Memory Card. Sliding the
switch to the "LOCK" position prevents writing on or formatting the card.
Write protection Switch
1
Set POWER to OFF.
To remove the Memory Card...
Press here to eject the card.
About the M-CARD Lock
Switch
Note
• By sliding M-CARD Lock to LOCK, you
can prevent POWER from accidentally
entering the M-CARD position when
changing POWER to CAMERA.
DV202_402-K.p 11-14.p65
Before you begin
• Charge the Battery. (p. 14)
Capacity
8 MB
8 MB, 16 MB
8 MB
2
Slide DOOR OPEN to open
M-CARD door.
3
Insert the Memory Card and hold
in place until you hear a click.
4
Close the M-CARD Door.
When inserting the Memory
Card
POWER
M-CARD Lock
Note
• When inserting the Memory Card, insert
with the cropped corner down as shown in
the illustration above.
13
Quick Guide
cropped corner
13
2003/06/12, 10:14