Using Built-In Sd Drive - Panasonic MultiCam PV-DV202-K Operating Instructions Manual

Transferring Your Images (Macintosh)

Using Built-in SD Drive

ArcSoft applications Installation
(PV-DV402-K only)
• For information on ArcSoft applications:
TEL : 1-510-440-9901
FAX : 1-510-440-1270
Web Site : http://www.arcsoft.com
E-mail : support@arcsoft.com
DV202_402-K.p 92-93.p65
Before you begin
• Set POWER to OFF before inserting a
recorded Memory Card. (pp. 49, 50)
1
Set the Palmcorder POWER to
M-CARD.
2
Connect the Palmcorder to your
Macintosh using the USB Cable
(supplied). (p. 92)
• "PLEASE WAIT", "CONNECT WITH
PC", and "STORAGE" is displayed on
the LCD monitor.
3
Double click the "Untitled" icon.
• You can view images stored on the
Memory Card and also save them to
your hard disk.
4
Follow the instructions as they appear
on your Macintosh section screen.
Note
• Please do not change file or folder names
on the PC. The images on the Memory
Card may not be able to be viewed on the
Palmcorder.
• When "ACCESS" is displayed in the
EVF or LCD monitor, please do not
remove the Memory Card or USB Cable,
or turn off the power as data may be
damaged.
1
Turn on the Macintosh.
2
Insert the supplied Software
CD-ROM into the CD-ROM Drive.
3
Double click the "Panasonic" icon.
Double click the "ArcSoft" Folder.
4
Double click the "Panorama Maker
Installer," "PhotoBase Installer,"
"PhotoImpression Installer," and
"PhotoPrinter Pro Installer."
5
Follow the instructions as they appear
on your Macintosh section screen.
93
93
2003/06/12, 10:15