Transferring Your Images (Macintosh) - Panasonic PV-DV102 Operating Instructions Manual

Transferring Your Images (Macintosh)

You can transfer images from your Palmcorder tape to your Macintosh.
System Requirements
(for Built-in SD Drive)
• Mac OS 9.0~9.1
• iMac, iBook or Power Macintosh
USB port or Power Mac
• RAM: 64 MB or more
* Even if system requirements are met, there is no guarantee that the included software
will work on all personal computers.
Connection
1
Turn on your PC.
2
Set the Palmcorder POWER to M-CARD.
3
Connect the Palmcorder to your Macintosh using the USB Cable (supplied).
Note
• For extended use, it is recommended to use the AC Adaptor as a power source.
DV102.p 87-88.p65
• CD-ROM drive (for installation)
®
G3 with • USB Port
™ G4 • Mouse or other pointing device
2
USB Terminal
3
87
USB Terminal
USB Cable
(supplied)
02/03/05, 13:00
87