Battery Refresh Feature; Battery Care; Safety Precautions - Panasonic Palmcorder IQ PV-D406 Operating Instructions Manual

Table of Contents

Advertisement

Supplying Power
|
Battery Refresh Feature
This feature completely discharges the Battery before recharging begins.
To maintain your battery's operating capacity, use the refresh feature after about every five charges.
CHARGE Lamp
ONLY FOR U.S.A.
ATTENTION:
1 Plug in AC Adaptor.
2 Place the Battery into
the AC Adaptor.
S ides the BATTERY REFRESH
button.
The CHARGE Lamp will flash when
discharging begins and stop flashing
when fully discharged. POWER Lamp
will stay lit when fully charged.
Remove the Battery
* Should you accidentally press the BATTERY
REFRESH
button, remove Battery and then
re-insert it to begin charging.
* it takes about seven and a half hours when
both Battery Refresh and charging are
performed.
The product that you have purchased is powered by a rechargeable battery. The battery
is recyclable. At the end of its useful life, under various state and local laws, it may be
illega! to dispose of this battery into the municipal waste stream. Check with your local
solid waste officials for details in your area for recycling options or proper disposal.
Battery Care
Caution:
* Charge only with specified charger.
* The Battery can be charged within a tempera-
ture range of 32? F (0? C) and 104? F (40? C).
* The Battery may be warm after charging or
just after use. This is normal.
* Do not use an insufficiently charged or worn
out Battery.
Safety precautions:
* Do not get the Battery near, or dispose of in
fire.
* Do not directly connect (short circuit) the
positive (+) and negative (—) terminals.
* Never attempt to disassemble or reassemble
the Battery.
8
To avoid damage to the Battery:
* Do not drop or jar the Battery.
* Use the Battery with specified units only.
* If the Battery is used in extremely high
temperatures, a safety device will automati-
cally prevent operation.
To insure longer battery life:
* While not in use, remove Battery from the
Palmcorder and AC Adaptor and store
in a
cool, dark, dry place.
* Keep the Battery terminals clean.

Advertisement

Table of Contents
loading

Table of Contents