Installation And Maintenance Of Healthy Filter - Gree GWH09RB-K3DNA2C Service Manual

Installation Manual
7.5.1 Check after Installation
1.Before Operation Test
(1)Do not switch on power before installation is fi nished completely.
(2)Electric wiring must be connected correctly and securely.
(3)Cut-off valves of the connection pipes should be opened.
(4)All the impurities such as scraps and thrums must be cleared from the unit.
2.Operation Test Method
(1)Switch on power and press ON/OFF button on the remote controller to start operation.
(2)Press MODE button to select the COOL, HEAT (Not available for cooling only unit), FAN to check whether the
operation is normal or not.

7.6 Installation and Maintenance of Healthy Filter

7.6.1 Installation of Healthy Filter
1.Lift up the front panel from its two ends, as shown by the arrow direction, and
then remove the air fi lter. (as shown in Fig.a)
2.Attach the healthy fi lter onto the air fi lter, (as shown in Fig.b).
3. Install the air fi lter properly along the arrow direction in Fig.c, and then close
the panel .
7.6.2 Cleaning and Maintenance
Remove the healthy fi lter and reinstall it after cleaning according to the installation instruction. Do not use brush or hard
objects to clean the fi lter. After cleaning, be sure to dry it in the shade.
7.6.3 Service Life
The general service life for the healthy fi lter is about one year under normal condition. As for silver ion fi lter, it is
ineffective when its surface becomes black (green).
This supplementary instruction is provided for reference to the unit with healthy fi lter. If the graphics provided herein
are different from the actual product, please refer to the actual product. The quantity of healthy fi lters is based on the
actual delivery.
Fig. a
Fig. b
Air filter
Healthy
filter
Fig. c
37