Gree GWH09RB-K3DNA2C Service Manual page 26

Function and Control
22 LOCK icon:
is displayed by pressing "+" and "-" buttons simultaneously. Press them again to clear the display.
23 SET TIME display:
After pressing TIMER button,ON or OFF will blink.This area will show the set time.
DIGITAL display:
24
This area will show the set temperature. In SAVE mode,"SE" will be displayed.
AIR icon:
25
is displayed when pressing the AIR button.Press this button again to clear the display.
HEALTH icon:
26
is displayed when pressing the HEALTH button.Press this button again to clear the display.
X-FAN icon:
27
is displayed when pressing the X-FAN button. Press this button again to clear the display.
TURBO icon:
28
is displayed when pressing the TURBO button.Press this button again to clear the display.
FAN SPEED display:
29
Press FAN button to select the desired fan speed setting(AUTOLow-Med-High).Your selection will be displayed in the LCD windows,
except the AUTO fan speed.
I FEEL icon:
30
is displayed when pressing the I FEEL button.Press this button again to clear the display.
8 Heating icon:
31
is displayed when Pressing "TEMP" and "CLOCK" simultaneously in Heat mode.
Remote Controller Description
ON/OFF :
1
Press this button to turn on the unit. Press this button again to turn off the unit.
-
2
Press this button to decrease set temperature. Hold it down for above 2 seconds to rapidly decrease set temperature. In AUTO mode,
set temperature is not adjustable.
+
3
Press this button to increase set temperature. Hold it down for above 2 seconds to rapidly increase set temperature. In AUTO mode,
set temperature is not adjustable.
MODE :
4
Each time you press this button, a mode is selected in a sequence that goes from AUTO, COOL,DRY, FAN,and HEAT *, as the following:
AUTO
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be displayed on the LCD, and the unit will
automatically select the suitable operation mode in accordance with the room temperature to make indoor room comfortable.
FAN :
5
This button is used for setting Fan Speed in the sequence that goes from AUTO,
30
31
COOL DRY FAN
Auto
Low speed
29
28
27
26
HEAT*
*Note:Only for models with heating function.
Medium speed High speed
to then back to Auto.
23