Table of Contents
Advertisement
Removal Procedure
7. Remove electric box
1
Pull out the indoor temperature sensor.
2
Remove screws connecting electric box and bottom
case, loosen clasps, remove screws connecting
earthing wire and evaporator, and then remove the
electric box.
8. Remove evaporator
1
Turn over bottom case, remove screws connecting pipe
clamp and bottom case, loosen clasps between
connecting pipe clamp and bottom case, and then remove
the connecting pipe clamp.
2
Remove screws connecting evaporator and motor
press plate and bottom case, loosen clasps fixing
evaporator and bottom case, adjust the pipeline and
then remove the evaporator.
pipe clamp
auxiliary piping
evaporator
indoor temperature sensor
electric box cover
electric box
75
Hide quick links:
Advertisement
Table of Contents
