Canon MB5300 series Online Manual page 632

• Place items correctly according to the type of item to be scanned. Otherwise, items may not be
scanned correctly.
Refer to
• When scanning both sides of the documents from the ADF (Auto Document Feeder), you can
scan A4 or Letter size documents.
• When scanning two or more documents from the ADF, place documents of the same size even if
Auto is set.
Note
• To reduce moire, set Select Source to Magazine.
Color Mode
Select the color mode in which to scan the item.
Note
• Only Color is available when Select Source is Auto.
Paper Size
Select the size of the item to be scanned.
When scanning both sides of the documents automatically from the ADF, select A4 or Letter.
When you select Custom, a screen in which you can specify the paper size appears. Select a Unit,
then enter the Width and Height, and then click OK.
Note
• Only Auto is available when Select Source is Auto.
• Click Defaults in the screen in which you can specify the paper size to restore the specified
settings to the default settings.
Resolution
Select the resolution of the item to be scanned.
The higher the resolution (value), the more detail in your image.
Resolution
Note
• Only Auto is available when Select Source is Auto.
Document Scan Orientation Settings...
This appears when you select ADF or Auto for Select Source.
Click to display the Document Scan Orientation Settings dialog box in which you can set the
orientation and binding side of the documents to be scanned from the ADF.
Downloaded from ManualsPrinter.com Manuals
"Placing Items (When Scanning from a Computer)" for how to place items.
632